LED Powerline ACIC

The LED Powerline ACIC with LED Powerdrive IC is a high intensity, air cooled LED curing system that is ideal for hardening UV and visible light curable adhesives and coatings. Producing intensity up to 22,000 mW/cm², the ACIC contributes to very fast curing cycles.

The Powerline ACIC with LED Powerdrive IC is a high intensity, air cooled LED curing system that is ideal for hardening UV and visible light curable adhesives and coatings. Producing intensity up to 22,000 mW/cm², the ACIC contributes to very fast curing cycles.

Two standard sizes are available: 82 mm x 20 mm and 122 mm x 20 mm. These arrays can be stacked to form larger irradiation areas with no intensity gaps. The Powerline ACIC LEDs have a typical service life of more than 20,000 hours, and are available in 365, 385, 395, 405 and 460 nm wavelengths. This variety allows to adjust the wavelength perfectly to any application.

The power supply and programming of the LED Powerline ACIC can be provided by either by the optionally available LED Powerdrive IC, or by using an external (48 Volt) power supply and PLC signals. Up to three LED Powerline modules can be actuated by a single Powerdrive IC.

Special features:

• Compact LED head design permits easy integration into existing processing equipment
• Ideally suited for mounting in conveyors, indexing tables, or rotary curing equipment
• Integrated Controller in each LED module
• Multiple cycle and power programmability
• Monitoring of LED segments regarding short-circuit, interruption and excess temperature
• Recording of the operating hours
• Analogue dimming of the LED’s via a 0-10 V-signal
• Digital PLC interface
• Bus control of all modules via RS485 or optional LED Powerdrive IC

The LED Powerline ACIC is appropriate for various applications, such as:

• Bonding, potting, or encapsulating of components and assemblies found in the electronics, optical, or medical device industries.
• Fluorescence stimulation for materials testing; also suitable for automatic image processing
• High-intensive UV irradiation in the chemical, biological and pharmaceutical sector
• Curing processes in printing and coating applications

Download:

Flyer LED Powerline ACIC

The LED Powerdrive IC (Integrated Controller) allows the independent operation of up to 3 LED Powerline ACIC. Two versions are available:

• the LED Powerdrive IC 400 / IC 1200 can drive up to three LED Powerline ACIC 820 XP or alternatively up to three Powerlines ACIC 410.

The adjustment of the irradiation time is freely selectable in the ranges of 0.01 – 99.99 sec. or 0.1 – 999.9 sec or 1 – 9999 sec. Alternatively, continuous operation can be chosen.

The operating status and the temperature of the LED segments as well as the irradiation time can be seen on the display at a glance. The electrical LED power can be adjusted between 10 % and 100 % in 1 %-steps.

The device is recording the LED operating hours and the service menu gives comprehensive information about the current operation status.

In addition the LED Powerdrive IC is characterized by the following features:

• Large and clear display with all relevant information
• Smart power control
• Temperature / error control of LED
• Shortest cycle time (0.01 s when set on display/100 µs in case of external activation)

Special features:

• Monitoring of LED segments regarding short-circuit, interruption and excess temperature
• auto recognition of connected LED Powerline ACIC

The LED Powerdrive IC has the following interfaces:

• Analogue preselected target value 1V – 10V ≙ 10% – 100% • PLC inputs: LED on, LED enable
• PLC outputs: LED is on, LED is off, LED error, LED warning • Dry relais contact function (see PLC outputs)
• Foot switch
• Optional: with safety-related release according to performance level d

Technical Data

* measured with Hoenle LED sensors for UV meter

Do you have any questions or need support for our Curing Solutions? We are happy to help you.